Dodge bearing and Intelli-Lube equipment on an aggregate maintenance workbench
Dodge, an RBC Bearings companyApplied Aggregate Solutions

Dodge Aggregate Solutions

Bearing protection. Connected lubrication.

Explore Harsh Duty™ bearings and OPTIFY™ Intelli-Lube® for demanding aggregate operations.

Shop Harsh Duty BearingsContact an Expert
Applied Aggregate Solutions Part of Applied® Aggregate Solutions
Back to Aggregate Solutions

Protection and maintenance, working together

Harsh Duty™ bearings pair ArmorTect™ sealing and factory-filled grease with compatibility for OPTIFY™ Intelli-Lube®. Add connected, automatic lubrication to your bearing maintenance strategy.

Explore both product families below, then connect with an Applied® representative for help with your application.

Intelli-Lube installation beside an aggregate conveyor
OPTIFY™ Intelli-Lube® in an aggregate application.
Dodge Harsh Duty bearings plus OPTIFY Intelli-Lube: buy both and get two years of warranty

Bearing protection + automatic lubrication

Pair Dodge Harsh Duty™ bearings with OPTIFY™ Intelli-Lube® to bring bearing protection and connected lubrication together.

Dodge’s 1+1=2 warranty offer

Dodge advertises a two-year warranty when Harsh Duty™ bearings and OPTIFY™ Intelli-Lube® are purchased together.

Contact an Applied® representative to confirm eligible products and the full Dodge warranty terms.

Ask About the 1+1=2 OfferShop Dodge Products
01 / Harsh Duty™ Bearings

Built for demanding environments

Building on over 80 years of Type E engineering, Dodge Harsh Duty™ bearings combine ArmorTect™ sealing, 100% factory-filled grease, and OPTIFY™ Intelli-Lube® compatibility.

Cutaway of a Dodge Type E bearing showing internal bearing and sealing components
Inside the bearing and sealing arrangement.
Contact a Harsh Duty Expert

Key features & innovations

ArmorTect™ sealing

Four contact points and two trash guards help exclude particles. The seal is mechanically retained and allows grease purging.

Factory-filled grease

Bearings arrive pre-assembled and filled to 100% with grease.

Sensor-ready housing

Pre-drilled and tapped housing accepts condition monitoring sensors.

Intelli-Lube® compatibility

Supports connected, automatic single-point lubrication.

Dual locking collars

65° set screw angle for shaft locking.

TAF and Type E housings

Explore configurations for different shaft sizes and mounting requirements.

Browse the Harsh Duty™ series

Compare TAF and Type E configurations, then view product details on Applied.com

TAF Series

TAF Series bearing P4B528-TAFD-415R
TAF Series

P4B528-TAFD-415R

Mounted tapered roller bearing

View Product
TAF Series bearing P4B528-TAFD-415RE
TAF Series

P4B528-TAFD-415RE

Mounted tapered roller bearing

View Product

Type E Series

Type E Series bearing P2B-ED-307R
Type E Series

P2B-ED-307R

Mounted tapered roller bearing

View Product
Type E Series bearing P2B-ED-215R
Type E Series

P2B-ED-215R

Mounted tapered roller bearing

View Product
Type E Series bearing P2B-ED-207R
Type E Series

P2B-ED-207R

Mounted tapered roller bearing

View Product
Shop All Harsh Duty BearingsContact an Expert
OPTIFY Intelli-Lube drive and cartridge assembly
Automatic, single-point lubrication
02 / Connected lubrication

Dodge OPTIFY™ Intelli-Lube®

Intelli-Lube is an automatic, single-point lubricator that replaces the manual process of lubricating mounted bearings and motor bearings and connects with OPTIFY™, Dodge’s condition monitoring platform.

Support your maintenance program with consistent grease delivery, intuitive selection and ordering, and intelligent lubrication systems.

Application fitMounted and motor bearings
MonitoringConnected through OPTIFY™
Maintenance goalConsistent grease delivery
View the Intelli-Lube BrochureExplore OPTIFY Solutions

Take the guesswork out of greasing

Lubrication deserves a place at the center of your bearing maintenance plan. Dodge’s Intelli-Lube brochure reports that up to 80% of bearing failures are linked to lubrication issues, based on its analysis of multiple engineering studies.

Automatic lubrication and remote monitoring can help teams manage grease delivery and identify when a lubricator needs attention.

Read Dodge’s Lubrication Overview
Dodge bearing failure chart: 80% lubrication issues, 10% incorrect installation, 9% wrong bearings, 1% other
Supplier-reported figures from Dodge’s OPTIFY™ Intelli-Lube® brochure, BR4GN01-06.26. See the brochure for context.

A connected approach to lubrication

Consistent grease delivery

An electromechanical drive dispenses grease independently of environmental temperature changes.

Remote visibility

Use OPTIFY™ to check grease fill levels, system health, and blockages.

Application-based selection

Dodge’s PT Wizard helps select cartridges, dispense settings, and installation components.

Cartridge management

OPTIFY™ replacement notifications support plant-wide cartridge planning.

Explore the OPTIFY Platform
Dodge OPTIFY equipment including a bearing, sensors, gateway, Intelli-Lube, and monitoring interface
Lubrication and condition monitoring within the OPTIFY™ portfolio.

Direct or remote mounting

Mount at the lubrication point or use a remote mounting kit to suit vibration, connectivity, and maintenance access requirements.

Explore Intelli-Lube components

Review the drive unit and mounting hardware, then confirm the complete setup for your application.

Dodge Intelli-Lube drive unit 750212
750212

Intelli-Lube® Drive Unit

The drive component for your automatic lubrication setup.

Shop the Drive Unit
Dodge Intelli-Lube cage hanger 750398
750398 / IL-HD-Mount

Intelli-Lube® Cage Hanger

Mounting hardware for your Intelli-Lube installation.

Shop the Cage Hanger

See the technology in action

Intelli-Lube units installed on industrial equipmentWatch video

Intelli-Lube: The Premier Automatic Lubricator

Dodge connected lubrication and maintenance illustrationWatch video

OPTIFY: The Intelligent Condition Monitoring Platform

Watch the Additional Intelli-Lube VideoWatch OPTIFY Insights

Guides and Resources

Plan your rebuild, prepare critical spares, and explore aggregate industry resources.

Aggregate Industry Rebuild Season Guide cover
Planning guide

Rebuild Season Guide

Prepare for aggregate rebuild season.

Explore the guide
Aggregate Critical Spares Guide cover
Maintenance guide

Critical Spares Guide

Plan the spares your operation needs.

Explore the guide
Applied aggregate industry resources
Video resources

Aggregate Industry Videos

Explore practical aggregate equipment topics.

Explore the videos

Plan Your Dodge Bearing and Lubrication Setup

Connect with an Applied® representative to discuss Dodge bearing and lubrication solutions for your aggregate operation.

Contact UsFind a Service Center
Explore more rebuild resources and supplier solutions.Back to Aggregate Solutions

DISCLAIMER: The above content is provided by the supplier. Applied® does not guarantee the accuracy or timeliness of the content.
The above content is provided “AS IS”, AND ANY AND ALL EXPRESS AND IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ARE HEREBY EXCLUDED.
All warranties, if any, are solely from the supplier.